Uppsala: R&D Engineer

Hitta ansökningsinfo om jobbet R&D Engineer i Uppsala. Är det intressant kan du gå vidare och ansöka jobbet. Annars kan du klicka på arbetsgivaren eller yrkesbenämningen för att se alla jobb i Uppsala inom den kategorin.

Publicerad: 2026-01-08 // Varaktighet: Heltid

Do you want to join us and create a more sustainable future? EasyMining is looking for an R&D Engineer in Uppsala who wants to participate in the transition to a circular economy and help save the world's resources.

EasyMining is in the process of commercializing technologies based on its patented innovations and processes that recover clean commercial products using waste as raw material. 

We are now looking for a new team member that will join our R&D team and helps us support the start-up our phosphorous recovery plants.

Do you want to take part and influence the world?

Job brief

You will support our R&D team that works with developing and upscaling our processes. The position is normally on-site in our R&D Department in Uppsala and includes the design, setup and operation of laboratory experiments and pilot trials. Additionally, the role includes on-site support during commissioning of our first phosphorous recovery plants in Germany, Sweden and other European countries.

Our processes use common hydrometallurgy and chemical processing equipment such as leaching reactors, solid-liquid separation equipment, evaporators, mixer settlers, separation columns, pumps, etc. In addition, we maintain and operate a wide range of chemical analysis equipment.

Key responsibilities



• Design, set-up and execute chemical experiments
• Collaborate with our engineering and local operating teams at full scale plants
• Provide chemical and process specific knowledge to commissioning teams
• On-site troubleshooting of the chemical process during commissioning and handover
• Collect and analyze samples and interpretate the results
• Documentation of experiments and results


Travel requirements

The role will require periods of travel to project sites, mainly in Europe. A typical pattern is one month at site followed by one month home, but this may vary depending on project needs. Locations can include Germany, Sweden, or other European countries.

We offer you

A stimulating and challenging job where you will have the opportunity to develop skills together with motivated co-workers. You will take part in the development of new technologies that have the potential to change the world for the better, as well as the improvement of existing ones.

Educational & Experience requirements



• A Master's degree in Chemistry or Chemical Engineering, or equivalent working experience
• Experience with handling dangerous chemicals
• Experience with working in a chemical laboratory


Personal requirements



• You are an analytical thinker that likes to solve problems
• You have the ability to work structured in a fast paced environment
• You are a team player capable of interdepartmental collaboration
• You can handle confidential information responsibly
• You possess good documentation skill
• You have a willingness to travel for the commissioning of plants


It is an advantage if you have experience of:



• The operation of laboratory equipment
• Industrial chemical processes
• Process equipment for solid-liquid separation, crystallization, evaporation or solvent extraction


Language skills



• English (Fluent)
• Swedish (Benefit)
• German (Benefit)


Application and Contact 

Deadline is set to 11th of January. Our selection process is continuous, and the advert may close before the recruitment process is completed if we have moved forward to the screening or interview phase.

If you have any further questions, please contact:

Angela van der Werf (R&D Group Manager) angela.van.der.Werf@easymining.com

Alla platsannonser →

Andra jobb i Uppsala som Civilingenjör, forskning/utveckling, kemi

Nedan visas andra jobb i Uppsala som Civilingenjör, forskning/utveckling, kemi.

Preclinical Principal Scientist

Läs mer Dec 18
Preclinical Principal Scientist - Injectable Medical Devices

???? Uppsala, Sweden | Hybrid | Full-time | Permanent

Shape the future of aesthetic innovation at Galderma

At Galderma, we're not just offering a job - we're inviting you to shape the future of dermatology. As a global leader in the science of skin, we combine purpose with innovation to improve the lives of millions.

Now, we're looking for a passionate and driven Preclinical Principal Scientist to join our team in Uppsala and lead the preclinical safety strategy for our next-generation injectable medical devices. If you're ready to bring science to life and make an impact beyond the lab, this is your chance.



Why join Galderma in Uppsala?

Our site in Uppsala is Galderma's Global Center of Excellence for Aesthetics, home to over 600 professionals working across R&D, manufacturing, clinical development, and marketing - all under one roof.

You'll be part of a multidisciplinary team where science meets application, with world-leading brands such as Restylane®, Azzalure®, and Sculptra®. We offer:

* A hybrid work model with flexible hours
* Continuous learning & career development opportunities
* A diverse, inclusive, and collaborative culture
* A modern workplace just 10 minutes from Uppsala Central Station



About the role

As Preclinical Principal Scientist, you'll be a key scientific leader responsible for defining and driving preclinical strategies for our injectable devices - from biocompatibility and toxicological risk assessments to supporting regulatory submissions and clinical trials.

You'll collaborate cross-functionally with R&D, Regulatory Affairs, Quality Assurance, and Clinical Development, while also working closely with CROs, academic partners, and global regulatory authorities.

This is a strategic, science-driven position where your deep expertise will directly influence product safety, performance, and success in global markets.



Your main responsibilities

* Define biological risks and shape preclinical strategy for injectable medical devices
* Design, coordinate and interpret preclinical safety and biocompatibility studies
* Ensure compliance with ISO 10993 series, FDA guidance, EU MDR and global regulations
* Write, review, and deliver high-quality scientific documentation: protocols, reports, and regulatory submissions (e.g., IDE, 510(k), CE marking)
* Act as preclinical lead in cross-functional projects and external collaborations
* Contribute to risk assessments per ISO 14971 and biological evaluations per ISO 10993-1
* Monitor scientific and regulatory developments in biomaterials and injectables



What we're looking for

We're seeking an experienced scientific leader who thrives at the intersection of regulatory science, toxicology, and medical device development.

Must-have qualifications:

* Ph.D. (or equivalent) in Biomedical Sciences, Toxicology, Pharmacology, Bioengineering or similar
* 6-10 years of experience in preclinical development of medical devices, preferably injectables
* Proven expertise in ISO 10993, GLP, EU MDR, and FDA regulatory requirements
* Strong background in biocompatibility testing and toxicological risk assessment
* Experience managing CROs and outsourced preclinical studies
* Excellent scientific writing and communication skills
* Fluent in English (Swedish is a plus)



Ready to make a real-world impact?

Apply now and take the lead in driving scientific excellence and patient safety in one of the world's most exciting areas of dermatology.

???? Bring your science. Shape the future.

Ansök nu

Senior DP-filling Scientist

Läs mer Dec 12
Job Title: Senior DP-filling Scientist
Location: Uppsala, Sweden (onsite)



Join Our Mission to Advance Biologic Drug Development - We're Hiring a Senior DP-filling Scientist



Do you want to work hands-on with the development of high-quality biological Drug Products in an innovative and science-driven environment? Are you experienced in pharmaceutical manufacturing with specific skills and knowledge in DP-filling science such as formulation, sterile filtration and filling technology for biological products with a deep understanding of all requirements around aseptic filling and ready to shape future processes that bring biologic therapies to patients?



We are currently seeking a skilled and motivated Senior DP-filling Scientist to join our expanding team. In this role, you will contribute to the development and optimization of injectable drug product processes, with a clear focus on quality, scalability, and compliance.



What You Will Do



You will be part of the Product Science & MS&T function, supporting both early and late-stage development. Your key responsibilities will include:

· Designing and optimizing processes for formulation, filtration, and filling of drug products

· Translating development work into scalable, robust manufacturing processes

· Contributing to technology transfer, troubleshooting, and process improvements

· Supporting documentation for regulatory submissions and internal quality systems

· Collaborating closely with R&D, Operations, QA, and Regulatory Affairs



What You Bring



· A Master's or Bachelor's degree in Bioprocess Engineering, Chemical Engineering, Mechanical Engineering, or a related life science field

· At least 5 years of experience, 10-15 years is meriting, in drug product development, pharmaceutical process development, or related manufacturing roles

· Strong knowledge of formulation, mixing, and drug product handling

· Experience with aseptic processing, injectable products, or biologics is highly valued but not required



Soft Skills That Matter



· You are a strong communicator with the ability to work cross-functionally and build effective relationships

· You work in a structured, analytical way and take initiative to solve problems

· You are adaptable, collaborative, and motivated by quality and continuous improvement



Why Join Us?



· Be part of a growing organization focused on innovation in biologics and injectable drug products

· Join a passionate, skilled team with strong scientific expertise and collaborative culture

· Work from our expanding site in Uppsala, with career development opportunities and modern technology platforms

Ready to take the next step in your pharmaceutical career? Apply now and help us shape the future of injectable biologics.

Ansök nu

Process Development Engineer, Biologics

Läs mer Nov 20
Job Title: Process Development Engineer, Biologics (Drug Substance or Drug Product)

Location: Uppsala, Sweden (Hybrid)



Job description :

We are looking for a new member to the Biologics team within Manufacturing Science and Technology. The Process Development Engineer is a subject matter expert (SME) responsible for new product implementation (NPI) into a manufacturing facility.



Key responsibilities:

*

Support new product implementation (NPI) strategy and all aspects of process validation, including process data reviews, investigations, risk management, and change implementation. Write validation documentation and execute process validation under guidance from senior scientists.
*

Serve as a technical SME representing MSAT in Technology Transfer projects.
*

Process owner to support day-to-day operations with a focus on continuous improvements. Identify opportunities for process enhancement, cost reduction, and efficiency gains, proactively driving necessary changes.
*

Lead and participate in investigations into deviations, incidents, and anomalies within the manufacturing process. Conduct in-depth root cause analysis to identify the underlying reasons for deviations and incidents, focusing on process improvement.
*

Collect data from various sources, including quality control reports, production logs, and other relevant documents, to support investigations and continuous process verification (CPV)
*

Write and review technical documentation ensuring compliance with regulatory and quality standards.
*

Coordinate with other experts and collaborate with cross-functional teams, including production, quality assurance, regulatory affairs, and process development, to ensure thorough investigation and timely issue resolution. Assist senior scientists in information gathering to support research studies and claims, and provide input to risk assessments/FMEAs.
*

Prepare detailed investigation reports, conveying findings and recommendations to management and relevant stakeholders



Skills & Qualifications

*

BSc or MSc in a relevant scientific or engineering field, such as Chemistry, Biochemistry, Chemical Engineering, or related discipline
*

Minimum of 2 years of experience in a biopharmaceutical environment
*

Familiarity with manufacturing processes in the biopharmaceutical industry
*

Experience in investigative methodologies and root cause analysis techniques





What we offer in return

You will be working for an organisation that embraces diversity & inclusion and believe we will deliver better outcomes by reflecting the perspectives of our diverse customer base.



As Galderma's Global Center of Excellence for Aesthetics we have in Uppsala a unique edge as we have on our site the whole product chain from research and development to production and marketing. Here our nearly 600 employees work on our world leading brands such as Restylane, Azzalure and Sculptra.



We are offering you the opportunity to work in an exciting, international environment where both professional and personal development is encouraged. We are based in modern offices and located just by the river (Fyrisån) in Uppsala only a 10-minute bike ride from Uppsala Central Station.



Next steps

We welcome your application via our company website CAREERS | Galderma. Apply as soon as possible, as the selection process is ongoing continuously.

*

If your profile is a match, we will invite you for a first virtual conversation with the recruiter.
*

The next step is an interview with the hiring manager
*

The final step is a panel conversation with the extended team



Our people make a difference

At Galderma, you'll work with people who are like you. And people that are different. We value what every member of our team brings. Professionalism, collaboration, and a friendly, supportive ethos is the perfect environment for people to thrive and excel in what they do.

Ansök nu

Preclinical Principal Scientist

Läs mer Nov 3
Preclinical Principal Scientist - Injectable Medical Devices

???? Uppsala, Sweden | Hybrid | Full-time | Permanent

Shape the future of aesthetic innovation at Galderma

At Galderma, we're not just offering a job - we're inviting you to shape the future of dermatology. As a global leader in the science of skin, we combine purpose with innovation to improve the lives of millions.

Now, we're looking for a passionate and driven Preclinical Principal Scientist to join our team in Uppsala and lead the preclinical safety strategy for our next-generation injectable medical devices. If you're ready to bring science to life and make an impact beyond the lab, this is your chance.



Why join Galderma in Uppsala?

Our site in Uppsala is Galderma's Global Center of Excellence for Aesthetics, home to over 600 professionals working across R&D, manufacturing, clinical development, and marketing - all under one roof.

You'll be part of a multidisciplinary team where science meets application, with world-leading brands such as Restylane®, Azzalure®, and Sculptra®. We offer:

* A hybrid work model with flexible hours
* Continuous learning & career development opportunities
* A diverse, inclusive, and collaborative culture
* A modern workplace just 10 minutes from Uppsala Central Station



About the role

As Preclinical Principal Scientist, you'll be a key scientific leader responsible for defining and driving preclinical strategies for our injectable devices - from biocompatibility and toxicological risk assessments to supporting regulatory submissions and clinical trials.

You'll collaborate cross-functionally with R&D, Regulatory Affairs, Quality Assurance, and Clinical Development, while also working closely with CROs, academic partners, and global regulatory authorities.

This is a strategic, science-driven position where your deep expertise will directly influence product safety, performance, and success in global markets.



Your main responsibilities

* Define biological risks and shape preclinical strategy for injectable medical devices
* Design, coordinate and interpret preclinical safety and biocompatibility studies
* Ensure compliance with ISO 10993 series, FDA guidance, EU MDR and global regulations
* Write, review, and deliver high-quality scientific documentation: protocols, reports, and regulatory submissions (e.g., IDE, 510(k), CE marking)
* Act as preclinical lead in cross-functional projects and external collaborations
* Contribute to risk assessments per ISO 14971 and biological evaluations per ISO 10993-1
* Monitor scientific and regulatory developments in biomaterials and injectables



What we're looking for

We're seeking an experienced scientific leader who thrives at the intersection of regulatory science, toxicology, and medical device development.

Must-have qualifications:

* Ph.D. (or equivalent) in Biomedical Sciences, Toxicology, Pharmacology, Bioengineering or similar
* 6-10 years of experience in preclinical development of medical devices, preferably injectables
* Proven expertise in ISO 10993, GLP, EU MDR, and FDA regulatory requirements
* Strong background in biocompatibility testing and toxicological risk assessment
* Experience managing CROs and outsourced preclinical studies
* Excellent scientific writing and communication skills
* Fluent in English (Swedish is a plus)



Ready to make a real-world impact?

Apply now and take the lead in driving scientific excellence and patient safety in one of the world's most exciting areas of dermatology.

???? Bring your science. Shape the future.

Ansök nu

Andra jobb i Uppsala från Ragn-Sells Recycling AB

Nedan visas andra jobb i Uppsala från Ragn-Sells Recycling AB .

Pilot Engineer

Laboratorieingenjör, kemi
Läs mer Maj 13
Do you want to join us and create a more sustainable future?

EasyMining is looking for a Pilot Engineer in Uppsala who want to participate in the transition to a circular economy and help save the world's resources.
EasyMining is in the process of commercializing technologies based on its patented innovations and processes that recover clean commercial products using waste as raw material. Our technologies include phosphorus recovery from ashes of incinerated sewage sludge, a process that can reduce the energy requirement for treating nitrogen-containing wastewater by recovering the nitrogen in form of commercial products, as well as a process for extraction of salts from fly ash from household waste incineration.

We are now looking for a new team member to support our team in designing, setting up, testing, and running pilots as well as maintaining pilot equipment.

Do you want to take part and influence the world?

Job brief
You will support our R&D team that works with developing and upscaling our processes. The position is in our R&D Department in Uppsala and includes on-site work with setting up, optimization, calibration, and maintenance of our equipment as well as running of setups according to recipes. For this, you will handle a variety of chemicals, which can be dangerous in different ways. Most commonly, they have either a very high or low pH and some emit dangerous fumes.

Our R&D facility designed for test and scale-up of chemical processes. We use equipment common in hydrometallurgy and chemical processes including leaching reactors, solid-liquid separation equipment (e.g. filter presses, belt filter, centrifuges), mixer-settlers and separation columns for solvent extraction, different kinds of pumps, evaporator etc. In addition, we maintain and operate a wide range of laboratory and analytical equipment.

Responsibilities
Design, set-up and execute pilot work with a safety-first perspective
Run and troubleshoot pilot set-ups

Maintenance of equipment

Act as a team member on an operations crew
Handling of chemicals in a safe manner
Provide documentation of work

We offer you

A stimulating and challenging job where you will have the opportunity to develop skills and abilities together with motivated co-workers. You will take part in the development of new technologies that have the potential to change the world for the better, as well as the improvement of existing ones.

Required education, skills, and experience


• Relevant experience in a process plant or manufacturing environment, Master of Science or Engineering
• Fluent in the English language both speaking and writing
• Good capability in reading Swedish Text
• Experience with process equipment
• Willing to work hands on developing EasyMining’s processes
• Can handle confidential information
• Craft skills and technical understanding
• A valid work permit for Sweden and Europe

Beneficial skills and experience


• Working proficiency in Swedish
• Experience with industrial chemical processes (for example fertilizer, mining, pulp and paper)
• Experience with industrial solid-liquid separation processes
• Experience with industrial precipitation and crystallization processes
• Experience with the operation of laboratory equipment
• A willingness to travel for potential pilot trials (e.g. South Sweden, Germany, Netherlands)

Further information 

EasyMining is an innovation company dedicated to closing nutrient cycles. We are owned by the Swedish environmental company Ragn-Sells group since 2014. Ragn-Sells is operating in 5 countries with an annual turnover of above 800 M€ and approximately 2500 employees. 

EasyMining is today employing over 60 people. The engineering and management office is located in the city center of Gothenburg (Gårda), the R&D is situated with office and laboratory facilities in Uppsala, and our German office is located in Berlin. 

 

Apply by ANSÖK below. Deadline is June 8th. Our selection process is continuous, and the advert may close before the recruitment process is completed if we have moved forward to the screening or interview phase.

If you have any further questions please contact:
Olof Haglund (Group Manager) olof.haglund@easymining.com
Stephan Liefeldt (Pilot Manager) stephan.liefeldt@easymining.com

Background 

Recovery and recycling of nutrients such as phosphorus, nitrogen, and potassium from society back to the agriculture is important for sustainability. Phosphorus and potassium are scarce resources in which EU is heavily dependent on virgin import while the manufacturing of mineral nitrogen fertilizers especially has a big negative climate impact. Today, biological methods are almost solely used for treating nitrogen containing wastewaters. These processes consume large amounts of energy due to aerification and use of fossil raw materials. In addition, the established processes to produce nitrogen fertilizers (from natural gas) lead to further emissions of greenhouse gases. 

EasyMining has several patented processes that enable recovery of clean commercial products by using waste as raw materials. Examples of our processes are phosphorus recovery from incinerated sewage sludge ashes (Ash2Phos) and nitrogen recovery (Project N) from nitrogen containing wastewater. The Aqua2N technology enables to chemically both extract the nitrogen from sewage wastewater but also convert the extracted nitrogen to a commercial nitrogen fertilizer and thereby reduce carbon emissions. 

You can read more about us and our technologies at our webpage.

Ansök nu

Fastighetsansvarig

Fastighetsförvaltare
Läs mer Feb 3
Vill du göra riktig skillnad varje dag? På Ragn-Sells är det exakt det vi gör, oavsett vilken position du har. Vi är ett familjeföretag i tredje generationen med erfarenheten i ryggen och blicken mot morgondagens innovationer. Hos oss får du vara med och forma en cirkulär framtid där vi minskar behovet av att bryta nya råvaror och istället använder det vi redan har – om och om igen.Är du en erfaren fastighetsförvaltare som även gillar att arbeta praktiskt. Ragn-Sells Treament & Detox söker nu en fastighetsansvarig till Agro i Region Mitt, placeringsort Uppsala.

Vi erbjuder dig


• Arbete inom en av Sveriges viktigaste branscher
• En trevlig arbetsplats med trevliga och kompetenta kollegor
• Självklart goda anställningsvillkor med kollektivavtal, pension, friskvårdsbidrag osv.

Agro är en avdelning i Ragn-Sells som återvinner växtnäring till åkermark. Växtnäringen består till största del av avloppsslam som behöver mellanlagras eller behandlas innan det återvinns. För detta ändamål har vi enklare former av anläggningar utspridda i Mälarregionen.

Det här kommer du att göra

Vi vill nu utöka vår grupp med en fastighetsansvarig. Som fastighetsansvarig ansvarar för tillsyn, skötsel, underhåll och utveckling av Agro Mitts mellanlager. Du ska självständigt driva, planera och prioritera underhåll och reparationer på anläggningar, vägar i direkt anslutning till anläggningen samt planera och dokumentera i befintliga system. Praktiskt arbete ute på anläggningarna utförs ibland av dig själv och vid vissa tillfällen med hjälp av dina kollegor.

I arbetet ingår även:


• Ta fram lösningar och aktivt ansvara för vattenhanteringen på våra mellanlager.
• Säkerställa att myndighetskrav följs samt ansvara för kontakter med kommuner.
• Ansvara för kontrakt med leverantörer och underleverantörer.
• Att kunna driva och delta i projekt för att utveckla anläggningarna, både gällande tillstånd samt byggnation.
• Driva arbete vid eventuella nyetableringar.
• Ansvara för kontakt med markägare/hyresvärdar, tecknande av nya avtal samt efterlevnad av befintliga arrende- och hyresavtal.

Rollen är ny i avdelningen vilket kommer innebära att personen behöver bygga upp en struktur för tjänsten. Under högsäsong och semester, juli-september, jobbar hela avdelningen produktionsnära och då kan arbetsuppgifterna variera. I tjänsten ingår löpande besök på våra mellanlager som finns i mälardalsregionen. Du utgår därför med fördel från exempelvis Enköping med omnejd.

Din profil

Som fastighetsansvarig arbetar du brett och självständigt med stort eget ansvar. Du behöver därför ha en god förmåga att ta egna initiativ för att driva arbetet framåt och en vilja att skapa fungerande arbetssätt för att förbättra och utveckla verksamheten. Du har en naturlig fallenhet för att skapa och upprätthålla goda relationer kombinerat med en prestigelös inställning gentemot dina kollegor, samarbetspartners och myndigheter. Du uppskattar mixen av att arbeta i kontor och ibland fysiskt arbete ute på en anläggning.

 Kvalifikationer:


• Erfarenhet och kunskap om bygg- och fastighetsbranschen och gärna eftergymnasial utbildning inom fastighetsområdet.
• B-körkort och tillgång till bil
• God datorvana, särskilt Officepaketets applikationer

 Meriterande:


• Projektledning
• Tillståndsprocesser
• Erfarenhet av arbete i planerings samt avvikelsesystem
• Vana att köra lastmaskin

 Ansökan och övrigt

Tjänsten är en tillsvidareanställning med provanställning i 6 månder. Tillträde sker efter överenskommelse. Sista ansökningsdag är 9/3-2025. Om du har frågor kring tjänsten är du välkommen att kontakta Lisa Wigh på lisa.wigh@ragnsells.com

Välkommen med din ansökan!

 

Ragn-Sells är ett av Sveriges främsta kompetensföretag inom återvinning och miljö. Vi samlar in, behandlar och återvinner avfall och restprodukter från näringsliv, organisationer och hushåll över hela Sverige. Våra erfarna och professionella medarbetare tror på enkla lösningar, ansvarstagande, helhetssyn och framåtanda. Vi är drygt 1600 medarbetare i Sverige. Ragn-Sells koncernen finns dessutom i Norge, Danmark och Estland. Totalt är vi ca 2500 personer i hela koncernen och 2023 omsatte koncernen ca 8,5 miljarder SEK.

Ansök nu

Junior R&D Engineer - 12-month assignment

Civilingenjör, anläggning
Läs mer Maj 30
Do you want to join us and create a more sustainable future?

EasyMining is looking for a driven and innovative person with a background in chemistry or chemical engineering who wants to help save the world’s resources and participate in the transition to a circular economy by joining our R&D team in Uppsala.

EasyMining is in the process of commercializing technologies based on patented innovations that focus on recovering clean commercial products using waste as raw material. Our technologies include phosphorous recovery from ashes of incinerated sludge, nitrogen recovery from wastewater, and extraction of chloride salts from fly ash produced during household waste incineration.  Read more about EasyMining at our website easymining.com.

We are now looking for a new team member to support our team in designing, optimizing, analyzing, testing, and improving one of our future technologies, both on the laboratory and pilot scale. Do you want to take part and influence the world?

Job brief
You will become part of the R&D team that works with the development and upscaling of our processes. The job includes designing and conducting laboratory experiments for the optimization and development of chemical processes. Our R&D facility is also equipped for the testing and scale-up of chemical processes. We use common hydrometallurgy and chemical processing equipment such as leaching reactors, solid-liquid separation equipment, evaporators, mixer settlers, separation columns, pumps, etc. In addition, we maintain and operate a wide range of chemical analysis equipment.

The position is in Uppsala and demands on-site work.  The assignment is a 12-month contract with the possibility of extension based on performance. Read more about the project on our website Sustainable Potassium (easymining.com)

Responsibilities

• Collaborate on the design and execution of work for process development and optimization
• Plan and execute work for equipment optimization
• Run laboratory and pilot trials
• Collect and analyze samples
• Document experiments and results

We offer you
A stimulating and challenging job where you will have the opportunity to continuously learn and develop skills and abilities together with motivated coworkers. You will take part in the development of new technologies that have the potential to change the world for the better.

Required education, skills, and experience

• A university degree in chemistry or chemical engineering.
• Technical skills for operating or maintaining laboratory and/or process equipment chemicals in a laboratory or pilot plant
• Ability to work independently and in a safe and organized way
• Can document results in an organized manner
Analytical mindset with excellent problem-solving skills.
• Full professional proficiency in English
• Can handle confidential information

Advantageous skills and experience

• Experience with the operation of laboratory and process equipment
• Experience with industrial precipitation and crystallization processes
Experience with industrial solid-liquid separation processes
• Experience with industrial chemical processes (for example fertilizer, mining, pulp and paper)

Application and Contact
Apply before 12th of june. We will look into the applications continuously. If you have any further questions please contact Group Manager, Olof Haglund at olof.haglund@easymining.com or R&D Engineer Ehsan Moslehi at ehsan.moslehi@easymining.se.

Further information
EasyMining was founded in 2007 and has been a company in the Ragn-Sells group since 2014. Ragn-Sells is a Swedish waste and recycling company operating in 4 countries with an annual turnover of above 850 M€ and approximately 2500 employees.

EasyMining employs over 50 people today and plans to grow. The engineering department and management are located in an office in central Gothenburg, while the R&D department with office and laboratory facilities is located in Uppsala, and our German office is located in Berlin. To read more about us and our technologies, please visit easymining.com.

Ansök nu